Property problemsA checklist

Septic tank replacement checklist (England)

First find out where your septic tank discharges and when that discharge started, because that decides which general binding rules apply. If it discharges straight to surface water, GOV.UK gives three options. Then sort the permissions, get itemised quotes, and if you are selling, agree who deals with it and tell the buyer in writing.

Start the listGet help →

These are the Environment Agency general binding rules, and they apply to England. Scotland, Wales and Northern Ireland have their own rules. For the options, the permissions and what affects the cost in more detail, see septic tank replacement.

The 8 steps

  1. Find out whether the tank discharges to the ground, through a drainage field, or to surface water such as a river, stream, estuary, lake, canal or coastal water. If you are not sure, GOV.UK says to get advice from a competent service engineer. Source: GOV.UK septic tanks overview and GOV.UK general binding rules for surface water.

  2. The rules depend on when it started: before 1 January 2015, from 1 January 2015 to before 2 October 2023, or on or after 2 October 2023. Moving the discharge point more than 10 metres, or switching between the ground and surface water, can put you in a later group. Source: GOV.UK general binding rules for surface water and GOV.UK general binding rules for the ground.

  3. Domestic sewage only. No more than 2 cubic metres (2,000 litres) a day to the ground, or 5 cubic metres (5,000 litres) a day to surface water. No pollution. A system that met the British Standard in place when it was installed (systems from before 1983 are exempt from that one rule). Source: GOV.UK general binding rules for surface water and GOV.UK general binding rules for the ground.

  4. GOV.UK says that, as soon as possible, you must connect to a public foul sewer, replace the septic tank with a small sewage treatment plant, or install a drainage field so it discharges to the ground. You must have plans in place to do this within a reasonable timescale, usually 12 months. Your local water company can tell you if there is a public sewer near your property. Source: GOV.UK general binding rules for surface water.

  5. GOV.UK says you must have building regulations approval if you install a new septic tank or small sewage treatment plant, and you may also need planning permission. If you cannot meet all the general binding rules that apply to you, you must apply to the Environment Agency for a permit. Source: GOV.UK general binding rules for the ground and GOV.UK general binding rules for surface water.

  6. Ask for a site survey before any quote, and itemised quotes covering the survey, supply, digging, commissioning and any drainage field. GOV.UK points to British Water's list of accredited service engineers and says there may be other competent engineers. VettedHome does not check or recommend firms. Keep the installation papers and any certificate of compliance with the British Standard. Source: GOV.UK general binding rules for the ground and GOV.UK general binding rules for surface water.

  7. Have the system emptied before the sludge goes beyond its maximum capacity, by a company that is a registered waste carrier, and repaired or replaced if it is not in good working order (for example leaks, cracks, blocked pipes or sewage smells). Source: GOV.UK general binding rules for surface water and GOV.UK general binding rules for the ground.

  8. Where the tank discharges directly to surface water, GOV.UK says the buyer and seller should agree, as a condition of sale, who will replace or upgrade it. When you sell, you must tell the new owner in writing that a sewage discharge is in place, with a description of the system, where its main parts and discharge point are, any changes made, how it should be maintained, and any maintenance records. Source: GOV.UK general binding rules for surface water and GOV.UK general binding rules for the ground.

None of this replaces advice on your own system. It puts the GOV.UK rules in the order most owners need them: find the facts first, then choose an option, then sort the permissions and the paperwork.

Questions people ask

Do these rules apply in Scotland, Wales or Northern Ireland?

No. The general binding rules on this page are the Environment Agency's rules for England. GOV.UK says there are different rules in Scotland, Wales and Northern Ireland, and links to the guidance for each.

Do I need a permit if I connect to the mains sewer?

No. GOV.UK says that if you connect your sewage system to a public foul sewer, the general binding rules no longer apply and you do not need a permit.

What if I cannot meet all the rules?

GOV.UK says you must either connect to a public foul sewer or change your system so it meets the rules. Otherwise you must apply for a permit, and explain in the application why it is not reasonable to connect to a public foul sewer.

Sources: GOV.UK general binding rules: small sewage discharge to a surface water, GOV.UK general binding rules: small sewage discharge to the ground and GOV.UK septic tanks and sewage treatment plants: what you need to do (Environment Agency, read 21 October 2026). See our data sources and updates page.

Adam Parker

Adam Parker

Editor, VettedHome

Adam leads VettedHome's editorial coverage of UK home services. He is the founder and managing director of Muswell Rose, the commercial strategy and modern systems business behind a portfolio of UK information sites, and he researches and writes the plain-English guides that help homeowners choose between installers and trades, drawing on the standards set by the relevant bodies for each job, such as Gas Safe Register, NICEIC, MCS, TrustMark and the Property Care Association. He is clear about what to check before any work starts.

Last updated:

Get help

What’s happening with your septic tank?

Tell us what’s happening and we’ll get back to you with the next step. Free to use.

Get help

Free to use · Nobody pays to be listed · We tell you who gets your details